QTP500T motorized hand trucks are to handle the heaviest work.

1. Easy Start – Pull out the red button to power up the cart.
2. Variable Speed Twist Throttle – Very easy to use and to control the speed.
3. Zero Turn Radius – The carts can be spun manually in a true zero turn radius due to the open differential.
4. Powder Coated Frame – The chassis is welded and powder coated in house for lasting finish
5. Axles, Bearings & Hub: The axle on the Trade Peak Electric Hand Truck is the most stronger by far in this field. #20 link shaft which is basically a shortened version of the axles found on boat and utility trailers. They are designed to handle unforgiving pounding with 550lbs on each single trailer wheel at highway speed. The 6204 bearing that is inside of the wheels could supply the susbantained quality. And other labor cart or handtruck which is normally used with ball bearings, that is really weak and low pressures.
6. Gearbox Ratio 1：28: The split low-speed gearbox with a speed ratio of 1:28 is more stable than that of 1:20, and the torque increase is greater than that of a motor with the same wattage and better control. Splitting the differential transmission can make turning in zero.
7. Electric Motor: 18-tooth brushless permanent magnet differential motor, which supply 200W, 400W, DC power input, brushless motor with high output power. There are 4 control methods to choose: I/O, RS-485 communication, CC-Link, MECHATROLINK. With the reliable performance, no wear, low failure rate, product life is about 6 times higher than that of brushed motors, and it also represents the development direction of motors. It is a static motor with low no-load current, high efficiency and small size.
8. Removable Rechargeable Battery Pack – Change out your battery pack with our hassle free design. You can swap out our packs in under 1 minutes.